Hello peoples, I own a 2013 Chevrolet Impala police car, and it’s got about 150k miles. Recently I bought new tires 235/55/R17 factory size with factory police steel rims, well my tires are rubbing on my rear strut/coil assembly. My rear suspension is shot and for the part 3 days I’ve had trouble finding the rear suspension to fit my 17 inch wheels. Preferably I want the assembly all new. I hate dealing with the grenade that shocks can be. But I don’t understand why it’s so hard to find what I’m looking for. Anyone know where to find rear suspension for my car?
Macprojects
My new Yokohamas rubbed on the rear strut plate. Stock size tires new oe struts but original springs.
I think some size deviation is allowed in the manufacturing.
I think some size deviation is allowed in the manufacturing.
Bilstein make a great shock and spring set up or if you're mechanically inclined weld plates over stock rear strut top mount location get a coilover kit from max speed or rev9 find the proper angle might have to open the strut box open mark drill and get the hole control arm system swap everything out good set up full front rear control arms and all going to run about 600-1000 Cheap 500 Or stock from tdr 380
@rhook122788 welcome to the forum.
Great post, thanks!
Post-up pictures after you get approved to do so! Just participate in active topics like this one that are pretty recent. Before long it'll automatically toggle your tool access.
Great post, thanks!
Post-up pictures after you get approved to do so! Just participate in active topics like this one that are pretty recent. Before long it'll automatically toggle your tool access.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
