Impala Forums banner
1 - 1 of 6 Posts

· Registered
13 Posts
I put 22x8.5 +38 wheels with 245/30r22 tires and it is fine, the rear rubbed on the spring plate if you bend it up it will take care of the rub. You can go with a lower offset and it will probably not rub, but I dont know if it will hit the fender on the outside when you hit bumps. The front has plenty of clearence.
Yup this is correct info..
and no it wont hit on the quarter panel... we just usually grind down the strut where it rubs till the wheel spins freely.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.