Impala Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi. I have 360 waylens security cam which will be placed on windshield. And i need to run the wire fro. Fusebox to cam. They suggested to put wire underneath dashboard.

I can't find any youtube showing how to get top part of dashboard off on 15 impala lt2

Thanks.

Ken
 

·
Registered
Joined
·
2,988 Posts
Hi. I have 360 waylens security cam which will be placed on windshield. And i need to run the wire fro. Fusebox to cam. They suggested to put wire underneath dashboard.

I can't find any youtube showing how to get top part of dashboard off on 15 impala lt2
Where on the glass do you want to put it? I can't say how to pull up the dash, but, if the cam is anywhere near either of the A-pillars, you should be able to run the wire under the A-pillar trim with it being exposed only the last few inches. If you put the cam up near the top of the glass, same thing - you can run the wire under the trim, then drop the last few inches down to the cam.

HTH.

Doug

.
 

·
Registered
Joined
·
306 Posts
Can u mount it high?? Like between the rear view mirror and the ceiling?? If so u can run wire under headliner, down the a pillar on left side and into the fuse panel pretty easily.

I have a radar detector and that’s how I did it and looks nice.

I’ve never pulled the dash apart


Sent from my iPhone using Tapatalk
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top