Impala Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1 (Edited)
hello all been awhile so ive finished building my motor and transmission in my 1970 impala its a stock bore 350 flat top pistons 2.02 fuelie heads ported and polished and port matched manly stainless valve harland sharp roller rockers comp cam xe268h cam long tube header performer intake with eddie 4 barrel 600cfm and 1 inch carb spacer with msd street fire dizzie. with a turbo 350 and 2500 stall converter im running a 275 60 15 rear tire. i have no idea what gears are in the rear w.e it came with from the factory. im planning on building the rear now but unsure if i should go 3.55 or 3.73 its not really a daily driver and it may end up at the track once or twice. any help would be greatly appreciated. video of the car
 

Attachments

1 - 1 of 1 Posts
Top