Impala Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
65 Posts
Discussion Starter #1
In order to peel back the bumper on the side, there's 4 screws holding in the black exterior carpet and 1 screw up top.

I'm trying to find the part # of the 4 screws and have no luck finding it online. I need this because one of the screws somehow fell off / was never installed.

Can someone help please? Thank you!
 

·
Registered
Joined
·
2,675 Posts
In order to peel back the bumper on the side, there's 4 screws holding in the black exterior carpet and 1 screw up top.

I'm trying to find the part # of the 4 screws and have no luck finding it online. I need this because one of the screws somehow fell off / was never installed.

Can someone help please? Thank you!
I'm not sure where on the bumper you mean, but take a look at this : https://www.gmpartsdirect.com/auto-parts/2017/chevrolet/impala/premier-trim/3-6l-v6-flex-engine/body-cat/bumper-and-components-rear-scat

Maybe the part you want is in the pic.

HTH.

Doug

.
 

·
Registered
Joined
·
65 Posts
Discussion Starter #4
I'm not sure where on the bumper you mean, but take a look at this : https://www.gmpartsdirect.com/auto-parts/2017/chevrolet/impala/premier-trim/3-6l-v6-flex-engine/body-cat/bumper-and-components-rear-scat

Maybe the part you want is in the pic.

HTH.

Doug

.
I Was looking at that page before I posted here. However that image somehow does not have the screws

On that page, the #2 (fender line bolt) is directly above the 4 screws that I'm talking about.

So you know how there's a black carpet thing attached to the rear bumper? behind the rear wheel and under the fender line bolt is where the 4 screws are.
 

·
Registered
Joined
·
2,675 Posts
1 - 10 of 10 Posts
Top