Impala Forums banner

1 - 2 of 2 Posts
V

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I Have A 62 Impala That Was Wearing A Tire On One Side, Shop Said Needed New Upper Ball Joints... I Changed Those And The Lower Ball Joints, Had It Aligned And Now The Front End Shakes When I Stop?? Before Anything Was Worked On It Drove Perfectly. ??

I Also Have A 64 Impala That Hadnt Been Driven In 20+ Years So I Changed Drums And Brakes And This One Shakes As I Stop As Well...

Any Help??
 

·
Registered
Joined
·
8 Posts
Bushings

I Have A 62 Impala That Was Wearing A Tire On One Side, Shop Said Needed New Upper Ball Joints... I Changed Those And The Lower Ball Joints, Had It Aligned And Now The Front End Shakes When I Stop?? Before Anything Was Worked On It Drove Perfectly. ??

I Also Have A 64 Impala That Hadnt Been Driven In 20+ Years So I Changed Drums And Brakes And This One Shakes As I Stop As Well...

Any Help??
I had the same problem when I thought I had replaced everything on my 64 Impala front end.An old school alignment guy here told me to replace the a arm bushings and the tire wear and shaking stopped.
 
1 - 2 of 2 Posts
Top