Impala Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
^ Tony, have you tried pulling the red 10 amp "Display" fuse in the underhood fuse panel on the pass. eng. side? Pull it, turn key to on/run a couple times and reinsert the fuse. This will often relearn the mode (vent) actuator. If no luck, may try disconnecting the neg. batt. cable for a few minutes then reconnecting. I'd try these 2 things before replacing the mode actuator. The fuse pull has worked for me and several others, but only for rebooting the mode actuator, not the other 3 actuators.
Thank you so very much for this. Worked for me. I pulled the display fuse, turned my key switch on and off 3 times and replaced the fuse. Works like a charm now.
 
1 - 1 of 1 Posts
Top