Impala Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
Im trying to get my front pass window back on two new window rollers i purchased, do you guys have any tricks for getting the ball back on to the roller? Im using a 2 inch and 1 and 1/2 inch c clamp but just cant get enough room to pop the ball back on, let me know if you use any tricks.
 

·
Banned
Joined
·
3,667 Posts
Small vice grip pliers, reach in from the bottom corner so you can angle it and then set it with enough pressure that when you get close to locking them, it snaps the 2 together.
 

·
Banned
Joined
·
3,667 Posts
If you do not have the vice grips, a pair of medium channel lock pliers will work. I hate c clamps, they are a PITA to work with on window guides.
 

·
Banned
Joined
·
3,667 Posts
Make sure to grease the whole channel of the window guide, this way there is minimal friction and way less chance they will break again.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top