Impala Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Finally got my 96 lt1 in my 94 caprice.I replaced my 2 front body mounts that support the doors welded those in along with replacement floor pans. The reason i mentoned that ,i had to take the grounds loose for the replacement. Now the problem is i have power to the starter there is juice to the coil but no power to any thing else, like fuel pump lights heater etc. and i used the original 94 wiring harness.Any suggestions would be appreciated.
 
1 - 1 of 1 Posts
Top