Impala Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Well, we finally got some decent weather and I decided to dig into my ABS warning lamp issue (in which the ABS fuse was good). All my sensors appeared okay, until I started digging around the ABS connector at the pump and found this problem:

So if y'all b-body owners get a chance, take action and protect those wires! I was able to repair 4 or 5 wires and the system works great again...



They were rubbing up on this portion of the wheel well:




 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top