Impala Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
I have replaced the rubber brake hoses on my '96 SS with Russell braided steel/Teflon hoses at all four corners,I am now having trouble figuring out how to tackle that last one on top of the axle.I do have the exhaust out,and car on stands with the axle at full droop.Any one done this and if so any advice ?...Also those pesky heat shieds above the gas tank on the back seat bulkhead...has anybody taken those off.... ? Any help here would be greatly appreciated !
 

·
Registered
Joined
·
51 Posts
Discussion Starter · #2 ·


Got that 5th brake hose installed. Thank you for your help.Now have the "brake bolt mod"done,rebuilt all the calipers,installed new pads,Russell braided hoses, put speed bleeders at all 4 corners and flushed/replaced the brake fluid.
 

·
Back in Black
Joined
·
4,127 Posts
should stop on a dime now and give you change.
nice pics also :eek:k3:
 
1 - 3 of 3 Posts
Top