Impala Forums banner
1 - 8 of 8 Posts

·
Premium Member
Joined
·
22,815 Posts
Discussion Starter · #1 ·
Alright, it's the biggest PITA to find a SS splitter, SOO I decided to work with an extra piece. I ordered a piece (thinking it was the SS splitter) and it turned out to be the front bumper black trim piece. SO, a year later (lol) I've decided to hack it up and try to fab a custom splitter. I started out with a brand new piece that looks like the below.

 

·
Premium Member
Joined
·
22,815 Posts
Discussion Starter · #2 ·
Yesterday I removed all the bottom tabs and the little lip on the center top (I'm working with it upside down from OEM application). I basically cut them off with trimming snips and sanded the edges smooth(er) with a sand paper wheel thing by hand (Didn't have anything else on hand). Basically it looks kinda like this now:
 

Attachments

·
Premium Member
Joined
·
22,815 Posts
Discussion Starter · #3 ·
More pics. I did a rough fit to trim the excess off the ends and here's what's going on now.
 

Attachments

·
Go Get It
Joined
·
15,095 Posts
Don't think the project was ever finished
 
1 - 8 of 8 Posts
Top