Impala Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey Guys,

My names Danny, I just joined up and have a 1960 Bel Air I'm just starting to install a 350TBI and 700R4 from a 1988 Chevy C1500 2wd truck.... I've been trying to look at forum postings on this topic but am not having luck.... I intend to use the factory ECM and wire harness,(working on figuring out how to intall that, but that's a question for another post). My question here is to the guys that have done this swap,.... What Fuel Pump setup have you used that works with TBI? Inline pump? A intank pump that will fit into a stock tank? A aftermarket tank with a intank pump that you retrofit into the stock tank spot on the car??? ANY help or ideas would be greatly appreciated!

Also if there are any guy on here that have actually done this same complete swap I'd love to here from you and how you accomplished it!

THANKS!

-Danny
 

·
Super Moderator
Joined
·
10,675 Posts
Welcome to the forum , post up some pics
 
1 - 2 of 2 Posts
Top