Impala Forums banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
598 Posts
Discussion Starter #1 (Edited)
I is dumb-dumb! I forgot that the 2006 - 2008 Impalas have different rocker panels than the 2009+, and so, I ordered the wrong set of splash guards for my 2008.

However, my carelessness is your gain!

I have for sale a set of molded front GM splash guards for the 2009 - 2016 Limited Impalas, part number GM19170964. They are brand spanking new, have never been installed, and still have their individual bags (removed for picture taking purposes). The shipping box was damaged so they will not arrive in a GM parts box.

They will come with all mounting accessories (six screws and two clips), as well as instructions.

(Also, these will fit the LTZ trim level with 18 inch rims.)

I am asking $25 + shipping, but am open to offers. They will be shipped from central-ish Indiana same or next business day with tracking. Feel free to contact me with any questions!
 

Attachments

·
Registered
Joined
·
598 Posts
Discussion Starter #2
*bump*

Any interest? I figured I'd rather they go to a forum member, but I'll start posting elsewhere in a couple days.
 

·
Registered
Joined
·
19 Posts
I was under the impression that the little fender flare added in 2009 didn't change much along the front edge where the skirt meets the wheel well. (Where these would go, that is.) I would have made the same mistake had I not seen this. That leading edge is definitely rounder on ours.

Interesting. May I also ask where you ordered these? Hard to find - local dealer says they can't get them. This is a fantastic deal for someone. Had to chime in and share that too!
 

·
Registered
Joined
·
598 Posts
Discussion Starter #4
I was under the impression that the little fender flare added in 2009 didn't change much along the front edge where the skirt meets the wheel well. (Where these would go, that is.) I would have made the same mistake had I not seen this. That leading edge is definitely rounder on ours.

Interesting. May I also ask where you ordered these? Hard to find - local dealer says they can't get them. This is a fantastic deal for someone. Had to chime in and share that too!
Thanks! Hopefully someone with a 2009+ will decide they want a set haha.

As for where the skirt meets the well, it is indeed not as rounded as ours. These will fit, but there is an unsightly (to me) gap of maybe a quarter inch between the rocker panel and the mud flap. It would bother the heck out of me! So technically, these fit the 2006 - 2008 as well, just not as well.

I got these from some Chevy dealership somewhere down south, through their online catalog. I don't remember which, unfortunately. Usually I just type in the part number I'm looking for in Google, Amazon and eBay and just shop around for the cheapest price. There are a lot of online parts stores that carry pretty much everything you can think of, such as Jegs, gmpartsdirect, etc. Prices can vary greatly though, so be sure to shop around, especially on eBay!

Also, I don't know if you were interested, but the part numbers for the ones that fit our Impalas (2006 - 2008) are GM 17800978 for the front and GM 17800979 for the rear. The rears fit all Impalas 2006 to 2016 Limited.

Hope this helps!
 

·
Registered
Joined
·
349 Posts
Smokin' deal on these for anyone looking to buy a pair. I think I paid nearly twice as much online for my front ones.

I also installed a matching rear set as well on my LTZ. They all fit great and really do a fine job cutting down on the grime that collects on the rocker panels and rear quarters. Haven't had any interference issues with my 235/50-18 tires.



Cheers!

T-
 

·
Registered
Joined
·
598 Posts
Discussion Starter #6
Bump! Accepting offers!
 

·
Registered
Joined
·
598 Posts
Discussion Starter #8 (Edited)
Sold, thank you all!
 

·
Super Moderator
Joined
·
10,732 Posts
Cool.....i will close!
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top