Impala Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello,

I can purchase a vehicle being surplussed by my employer but has no brakes at all. I spoke with the maintenance director who told me the vehicle has just came back from the shop with over $1200 in parts and it still isn’t fixed and that they are done with it. I inspected the car, overall condition is good and runs great. This was a fleet vehicle with regular maintenance. When I pushed him on the brake problem, I was told they put 4 new master cylinders on the car and then thought it was the ABS Module. Apparently, they do not make this part any longer is what I have been told. They found a used one and installed it-same problem.

To possibly help with diagnosing the problem, I have put some photos on here. I know very little about Chevy so any help would be great!

Master Cylinder:
164870


ABS Module:
164871


ABS Module 2:
164872


Close up of front ABS Module:
164873


ABS Module Part Number:
164874


I was looking at the car this morning and found this purple wire unplugged, could that be the issue?
164877



I know this isn't related to the problem, but it is a fully loaded car with heated leather author as well:
164875


Exterior:
164876
 

· Registered
Joined
·
300 Posts
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top